mega machinery & plastpack
Auto Deflashing
MODELS UNITS 200/D/H/1 200/D/H/2 1000/D/H/1
Screw Diameter MM 40 50 50
L. D. Ratio L/D 20:1 20:1 20:1
Blowing Capacity  M/L 200 200 1000
Screw Speed  RPM 0-75 0-75 0-75
Plasticizing Cap.  Kg/Hr. 16/18 24/26 24/26
Heating Zone  Nos. 5 5 5
Maximum Die Diameter HD 30 30 60
Center (Main to Dummy Mould) 175 265 300
       
Mould Opening Stroke  MM 125 125 175
Min. Mould Thickness MM 125 125 178
Mould Length MM 175 175 300
Mould Width MM 125 125 200
Dry Cycles / Min Nos 18 16 14
Max. Cont. Dia  60 60 125
       
Extruder Drive HP 3.7 10 10
Hydraulic Drive HP 3.7/5 3.7/5 3.7/5
Blowe HP - 1.5 1.5
Heating Load Kw/HP 7.5/10 9/12 10.5/14.1
Total Power of M/c. Kw/HP 14.86/20 21.31/29 21.5/29
Main Cable Rating mm2-amp 10-42 16.57 16/57
       
Parison Program OPT OPT OPT
Hot wire Cutter OPT OPT OPT
Double/ Triple Head OPT OPT OPT
V-Strip/Zebra line - - OPT
Bobbing Extruder OPT INC. INC.
Oil Tank Capacity Ltrs. 90 170 160
M/C Dimension L x W x H Mtrs. 1.73x1.1x1.9 2.0x1.8x2.0 2.3x1.6x2.4
Blowing Cylinder Hyd. Hyd. Hyd.
Control Panel Dimension  Mtrs. 0.5x0.7x1.6 0.5x0.7x1.6 0.5x0.7x1.6
       
Machine & Panel Wt. Ton  1.52 2.51 2.53
Air Requirement C.F.M 20 20 17